• icon+90(533) 652 66 86
  • iconnwsa.akademi@hotmail.com
  • icon Fırat Akademi Samsun-Türkiye

Article Details

  • Article Code : NWSA-3010-1704
  • Article Type : Araştırma Makalesi
  • Publication Number : 1A0186
  • Page Number : 672-680
  • Doi : 10.12739/
  • Abstract Reading : 1073
  • Download : 135
  • Share :

  • PDF Download

Issue Details

  • Year : 2011
  • Volume : 6
  • Issue : 2
  • Number of Articles Published : 16
  • Published Date : 1.04.2011

Cover Download Context Page Download
Engineering Sciences

Serial Number : 1A
ISSN No. : 1308-7231
Release Interval (in a Year) : 4 Issues

MİKRODENETLEYİCİ KONTROLLÜ YENİ BİR ALGILAYICI TASARIMI

HARUN SÜMBÜL 1

Bu çalışmada, fabrikalardaki üretim ve paketleme üniteleri arasında çalışan ve mikrodenetleyici ile kontrol edilen oldukça hassas bir dedektör tasarlanmıştır. Ürünler, tasarlanan dedektörden geçerek, içerisinde herhangi bir demir olup olmadığı gözden geçirilir ve eğer bir demir parçası tespit edilirse büyüklüğü hakkında üzerindeki LCD ekran aracılığı ile bilgi verir ve aynı zamanda sesli bir uyarı verir. Daha sonra hatalı ürünlerin paketleme ünitesine gitmemesi için hazırlanan pinomatik düzenekleri harekete geçirir. Böylece ürün, piston kol sayesinde üretim bantından uzaklaştırılmış olur. Sonuç olarak bu çalışmada, paketlemeden önceki son ürün kontrollerinde iyi sonuçların alındığı gözlemlenmiştir. Yapılan analizler sonucun da tasarlanan sistem ile yapılan kontrolün daha az zaman, gerçek ve güvenilir teşhisler sağladığı ve bunun gerçek hayatta kullanılabilirliği görülmüştür.

Keywords
Dedektör, Kontrol Sistemi, PI Sistemler, Gıda, Piston,

DESIGNING OF A NEW DETECTOR CONTROLLED BY MICROPROCESSOR

HARUN SÜMBÜL 1

In this study; we have designed a very sensitive detector that running between production and packaging units in the factories and controlled by microprocessor. Products pass from the designed detector and whether it have iron inside or not is controlled. If any iron fixed, about its size; it will be given information from the LCD screen which on it as the same time it have a voiced warning mechanism. Then, it activates the pneumatic devices prepared so that not to go defective products packaging unit. So, defective products removed from production belt due to the piston arm. As a result; We obtained very good results before packaging the final product control. The results of analyses carried out indicated that the controls performed with this system provide less time, reliable and consistent diagnosis and that they are feasible in real life.

Keywords
Detector, Control System, PI Systems, Food, Piston,

Details
   

Authors

HARUN SÜMBÜL (1) (Corresponding Author)

Gümüşhane Üniversitesi
habu_58@hotmail.com

Supporting Institution

:

Project Number

:

Thanks

:
References