• icon+90(533) 652 66 86
  • iconnwsa.akademi@hotmail.com
  • icon Fırat Akademi Samsun-Türkiye

Article Details

  • Article Code : NWSA-5106-2464
  • Article Type : Araştırma Makalesi
  • Publication Number : 1A0260
  • Page Number : 1540-1546
  • Doi : 10.12739/
  • Abstract Reading : 1180
  • Download : 131
  • Share :

  • PDF Download

Issue Details

  • Year : 2011
  • Volume : 6
  • Issue : 4
  • Number of Articles Published : 79
  • Published Date : 1.10.2011

Cover Download Context Page Download
Engineering Sciences

Serial Number : 1A
ISSN No. : 1308-7231
Release Interval (in a Year) : 4 Issues

FARKLI KÜR ŞARTLARININ POMZA AGREGALI HAFİF BETON ÖZELLİKLERİNE ETKİSİNİN ARAŞTIRILMASI

Celalettin BAŞYİĞİT1 , Ayşe AKKAŞ 2 , mutlu irem kartlı 3 , Eda serin 4

Bu çalışmada pomza hafif agregası ile üretilen hafif beton numunelerinin havada, suda ve sera ortamında kür edildikten sonra ki fiziksel ve mekanik özellikleri araştırılmıştır. Beton numunelerinin üretiminde 0-4 mm boyutlarında nehir kumu ile 4-16 mm boyutunda Isparta yöresi pomza agregası kullanılmıştır. Harçların çimento miktarı 350 kg/m3 ve su/çimento oranı 0,5 olarak sabit tutulmuştur. Dökülen beton numuneler (15x15x15) havada, suda ve bağıl nemi yüksek olan bir ortamda (sera) kür uygulamasına tabi tutulmuştur. Numuneler üzerinde basınç dayanımı ve birim hacim ağırlık değerleri belirlenmiştir. Elde edilen sonuçlar üç farklı ortamda kür edilen numunelerin özellikleri ile karşılaştırılmış ve 7 günlük basınç dayanımı deneyi sonucunda sera ortamında kür edilen numunenin basınç değerlerinin daha yüksek olduğu bunun yanı sıra 28 günlük basınç dayanımı deneyi sonucunda, suda kür edilmiş beton numunenin basınç değerlerinin daha yüksek olduğu görülmüştür.

Keywords
Lightweight Concrete, Pumice, Curing, Compressive Strenght, Concrete,

INVESTIGATION EFFECTS OF DIFFERENT CURING CONDITIONS ON PUMICE AGGREGATE LIGHTWEIGHT CONCRETE PROPERTIES

Celalettin BAŞYİĞİT1 , Ayşe AKKAŞ 1 , mutlu irem kartlı 1 , Eda serin 1

In this study lightweight concrete samples which are produced with pumice aggregates are researched for their physical and mechanic attributes after being cured in air, water and greenhouse environment. In the production of concrete samples, river sand which has the gradations of 0-4 mm. and pumice aggregations of Isparta area which have the gradations of 4-16mm. are used. Cement dosage 350 kg/m3 and the rate of water and cement which is 0,5 are fixed. concrete samples are demoulded (15x15x15) in cubes and cured in air, water and greenhouse. Compressive strenght and unit weight assets are caharacterized on the samples. the final results are compared with the characteristics of the samples which are cured in three different conditions and on the result of the 7-day of Compressive strenght the samples that are cured in greenhouse are higher than other conditions furthermore, on the result of the 28-day of Compressive strenght the concrete sample which is cured in water is higher than other conditions.

Keywords
Lightweight Concrete, Pumice, Curing, Compressive Strenght, Concrete,

Details
   

Authors

Celalettin BAŞYİĞİT (1)

Süleyman Demirel Üniversitesi
cbasyigit@tef.sdu.edu.tr

Ayşe AKKAŞ (2) (Corresponding Author)

ayseakkas@sdu.edu.tr

mutlu irem kartlı (3)

akacar@gmail.com

Eda serin (4)

hidiraltiner@mynet.com

Supporting Institution

:

Project Number

:

Thanks

:
References