+90(535) 849 84 68
nwsa.akademi@hotmail.com
Fırat Akademi Samsun-Türkiye
+90(535) 849 84 68nwsa.akademi@hotmail.com
Fırat Akademi Samsun-Türkiye
TANKLAR İÇİN SİNTER BALATA ÜRETİM VE KAREKTERİZASYONU
PRODUCTION AND CHARACTERIZATION OF SINTERED BRAKE PADS FOR TANKS |
| Bakır Matrisli Kompozit, Askeri Tank, Toz Metalurjisi, Balata, Sinter Balatalar, |
| Copper matrix composite, Military Tank, Powder Metallurgy, Brake, Sinter Lining, |
|
Technological Applied Sciences, Year : 2023, Volume : 18, Issue : 3, Published Date : 1.07.2023 |
|
|
ÇOK KATMANLI KARBON NANOTÜP TAKVİYELİ ALÜMİNYUM ESASLI KOMPOZİTLERİN MEKANİK ÖZELLİK VE MİKROYAPI İNCELEMESİ
INVESTIGATION OF MECHANICAL PROPERTIES AND MICROSTRUCTURE OF ALUMINUM BASED COMPOSITES REINFORCED WITH MULTI-WALLED CARBON NANOTUBES |
| Karbon Nanotüp, Alüminyum, Kompozit, Toz Metalürjisi, Mikroyapı, |
| Carbon Nanotube, Aluminum, Composite, Powder Metallurgy, Microstructure, |
|
Engineering Sciences, Year : 2021, Volume : 16, Issue : 1, Published Date : 1.01.2021 |
|
|
Polivinil Klorür/Perlit Nanokompozit Filmlerin Hazırlanması Ve Uçucu Organik Bileşen Metanolün Pervaporasyon İle Sudan Giderilmesinde Kullanılması
PREPARATION OF POLYVINYL CHLORIDE/PERLITE NANOCOMPOSITE FILMS AND THE USAGE OF REMOVAL OF VOLATILE ORGANIC COMPONENT METHANOL FROM WATER BY PERVAPORATION |
| Metanol, Nanokompozit, Perlit, Pervaporasyon, Polivinil Klorür, |
| Methanol, Nanocomposite, Perlite, Pervaporation, Polyvinyl Chloride, |
|
Physical Sciences, Year : 2020, Volume : 15, Issue : 1, Published Date : 1.01.2020 |
|
|
Al2024 MATRİSLİ Al2O3 TAKVİYELİ KOMPOZİTLERİN SICAK PRESLEME YÖNTEMİYLE ÜRETİMİNDE TAKVİYE ORANININ MİKROYAPI, SERTLİK VE AŞINMA ÖZELLİKLERİNE ETKİSİ
THE EFFECT OF REINFORCEMENT RATIO ON MICROSTRUCTURE, HARDNESS AND WEAR PROPERTIES IN THE PRODUCTION OF Al2024 MATRIX Al2O3 REINFORCED COMPOSITES BY HOT PRESSING METHOD |
| Sıcak Presleme, Al2024, Kompozit, Aşınma, Al2O3, |
| Hot Pressing, Al2024, Composite, Wear, Al2O3, |
|
Technological Applied Sciences, Year : 2020, Volume : 15, Issue : 1, Published Date : 1.01.2020 |
|
|
PLA/BOYNUZ BİYOKOMPOZİTLERİN TERMAL VE MEKANİK ÖZELLİKLERİNİN İNCELENMESİ
INVESTIGATION OF THERMAL AND MECHANICAL PROPERTIES OF PLA/HORN BIOCOMPOSITES |
| Polilaktik Asit (PLA, Boynuz, Keratin, Biyokompozit, Mekanik Özellikler, |
| Polylactic Acid (PLA), Horn, Keratin, Biocomposite, Mechanical Properties, |
|
Engineering Sciences, Year : 2019, Volume : 14, Issue : 4, Published Date : 1.10.2019 |
|
|
Sİ3N4-BN KOMPOZİT TOZ SENTEZİNDE MEKANİK AKTİVASYONUN Sİ3N4 FAZ OLUŞUM KİNETİĞİNE ETKİSİ
THE EFFECT OF MECHANICAL ACTIVATION ON ?-SI3N4 PHASE FORMATION KINETICS IN SYNTHESIS OF SI3N4-BN COMPOSITE POWDER |
| BN , Si3N4, Seramik Kompozit, Mekanik Aktivasyon, Karbotermal İndirgeme ve Nitridasyon Yöntemi(KTİN) , |
| BN , Si3N4, Ceramic Composite, Mechanical Activation, Carbothermal Reduction and Nitridation Method (KTIN), |
|
Engineering Sciences, Year : 2018, Volume : 13, Issue : 3, Published Date : 1.07.2018 |
|
|
SIC TAKVIYELİ ALÜMINYUM ESASLI KOMPOZITLERIN MEKANİK ÖZELLİKLERİNİN VE MİKRO YAPISININ İNCELENMESİ
THE INVESTIGATION ON MECHANICAL PROPERTIES AND MICROSTUCTURE OF SIC REINFORCED ALUMINUM MATRIX COMPOSITES |
| Alüminyum, Silisyum Karbür, Toz Metalürjisi, Kompozit, Sertlik, |
| Aluminum, Silicon Carbide, Powder Metallurgy, Composite, Hardness, |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 2, Published Date : 1.04.2018 |
|
|
MEKANİK ALAŞIMLAMA/ÖĞÜTME YÖNTEMİ İLE ÜRETİLEN Al-SiC KOMPOZİTLERİN İNCELENMESİ
AN INVESTIGATION OF Al-SiC COMPOSITES PRODUCED BY MECHANICAL ALLOYING/MECHANICAL MILLING METHOD |
|
İjlal ŞİMŞEK, MUSA YILDIRIM, Tansel TUNÇAY, Dursun ÖZYÜREK, Doğan ŞİMŞEK |
| Alüminyum Kompozit, Mekanik Öğütme, Toz Metalürjisi, Atritör, SiC, |
| Aluminum Composite, Mechanical Milling, Powder Metallurgy,, Attritor, SiC, |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 2, Published Date : 1.04.2018 |
|
|
TOZ METALURJİSİ YÖNTEMİYLE ÜRETİLEN ZA27/GRAFEN NANOKOMPOZİTLERİN KOROZYON DAVRANIŞI
CORROSION BEHAVIOR OF ZA27/GRAFEN NANOCOMPOSITES PRODUCED BY POWDER METALLURGY |
| ZA27 Alaşımı, Grafen Nanolevha, Toz Metalurjisi, Korozyon, Nanokompozit, |
| ZA27 Alloy, Graphene Nanosheet, Powder Metallurgy, Corrosion, Nanocomposites, |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 2, Published Date : 1.04.2018 |
|
|
Sİ3N4 TAKVİYESİYLE ATIK ALÜMİNYUMDAN ÜRETİLMİŞ KOMPOZİTLERİN ÖZELLİKLERİNİN İNCELENMESİ
INVESTIGATION OF PROPERTIES OF COMPOSİTES PRODUCED FROM WASTE ALUMINUM WITH Si3N4 REINFORCEMENT |
| Atık Alüminyum İçecek Kutusu, Alüminyum Matrisli Kompozit, Karıştırmalı Döküm, Si3N4, Kompozit, |
| Waste Aluminium Beverage Can, Aluminum Matrix Composite, Stir Casting, Si3N4, Composite , |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 1, Published Date : 1.01.2018 |
|
|
PP VE PP/TALK KOMPOZİTLERİN MEKANİK VE KÖPÜKLENME ÖZELLİKLERİ ÜZERİNE ERGİYİK SICAKLIĞI VE ENJEKSİYON BASINCININ ETKİLERİNİN İNCELENMESİ
INVESTIGATION OF THE EFFECT OF INJECTION PRESSURE AND MELT TEMPERATURE ON FOAMMABILITY AND MECHANICAL PROPERTIES OF PP AND PP/TALC COMPOSITE |
| PP Köpük, Köpük Ajanı, Hücre Morfolojisi, Mekanik Özellikle, Kompozit, |
| PP Foam, Foaming Agent, Cell Morphology, Mechanical Properties, Composite, |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 1, Published Date : 1.01.2018 |
|
|
TiB2-B4C KOMPOZİT TOZLARININ KARBÜR BORLAMA YÖNTEMİYLE ÜRETİLMESİ
PRODUCTION OF TiB2-B4C COMPOSITE POWDERS BY THE CARBIDE BORONIZING PROCESS |
| Amorf B, B4C, TiB2, Kompozit Toz, Karbür Borlama , |
| Amorph B, B4C, TiB2, Composite Powders, Carbide Boronizing, |
|
Engineering Sciences, Year : 2017, Volume : 12, Issue : 3, Published Date : 1.07.2017 |
|
|
Cu-TiC KOMPOZİTLERİN MEKANİK VE FİZİKSEL ÖZELLİKLERİNİN YAPAY SİNİR AĞLARI (YSA) MODELİ İLE TAHMİNİ
ESTIMATION OF MECHANICAL AND PHYSICAL PROPERTIES OF Cu-TiC COMPOSITES BY ARTIFICIAL NEURAL NETWORKS (ANN)MODEL |
| YSA, Cu-TiC Kompozitler, Sıcak Presleme, Mekanik Özellikler, Fiziksel Özellikler, |
| ANN, Cu-TiC Composites, Mechanical Properties, Physical Properties, Hot Pressing, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 3, Published Date : 1.07.2017 |
|
|
PANI/EPOKSİ VE PANI/ZnO/EPOKSİ POLİMERİK KOMPOZİTLERİN SENTEZİ, KARAKTERİZASYONU VE L304 ÇELİK ÜZERİNDEKİ KOROZYON DAVRANIŞININ İNCELENMESİ
SYNTHESIS, CHARACTERIZATION OF PANI/EPOXY AND PANI/ZnO/EPOXY POLYMERIC COMPOSITES AND INVESTIGATION OF THEIR CORROSION BEHAVIOR ON STEEL L304 |
| Korozyon, Polimerik Nanokompozit, Çelik,, Epoksi, I304 Çeliği , |
| Polymeric nanocomposite, , Corrosion, Steel, Epoksi, I304 Steel, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 3, Published Date : 1.07.2017 |
|
|
TOZ METALURJİSİ İLE ÜRETİLEN Cu-FeB KOMPOZİT MALZEMELERİN MİKROYAPI VE ELEKTRİKSEL ÖZELLİKLERİNİN İNCELENMESİ
INVESTIGATION OF MICROSTRUCTURE AND ELECTRICAL CHARACTERISTICS OF Cu-FeB COMPOSITE MATERIALS PRODUCED BY POWDER METALLURGY |
| Toz Metalurjisi, Metal Matrisli Kompozit, Elektriksel Özellikler,, Cu , FeB , |
| Powder Metallurgy , Metal Matrix Composite, Electrical Properties, Cu , FeB, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 2, Published Date : 1.04.2017 |
|
|
YAPAY AĞIZ SIVISINDA TERMAL ÇEVRİMİN KOMPOZİT RESTORATİF MALZEMELERİNİN YÜZEY PÜRÜZLÜLÜĞÜ ÜZERİNDEKİ ETKİSİ
EFFECT OF THERMAL CYCLING ON SURFACE OF ROUGHNESS COMPOSITE RESTORATIVE MATERIALS IN ARTIFICAL SALIVA |
| Restoratif Kompozit Malzeme, Termal Çevrim, Yüzey Pürüzlülüğü, Yapay Tükürük Sıvısı, SEM, |
| Composite Restorative Material, Thermal Cycle, Surface of Roughness, Artificial Saliva, SEM, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 2, Published Date : 1.04.2017 |
|
|
AHŞAP-BETON KOMPOZİT DÖŞEMELERİN BİNALARDA VE KÖPRÜLERDE KULLANIMI ÜZERİNE BİR İNCELEME
A REVIEW ON THE USE OF TIMBER-CONCRETE COMPOSITE FLOORS IN BUILDINGS AND BRIDGES |
| Ahşap-Beton Kompozit Sistem, Döşemeler, Ahşap, Beton, Binalar, |
| Timber-Concrete Composite System, Floors, Timber, Concrete, Buildings, |
|
Engineering Sciences, Year : 2016, Volume : 11, Issue : 4, Published Date : 1.10.2016 |
|
|
YAPMA I KİRİŞİN HM-CFRP İLE GÜÇLENDİRİLMESİNDE KELEPÇE KULLANIMI
EFFECTS OF CLAMPS IN COMPOSITE I-BEAMS STRENGTHENED WITH HM-CFRP |
| Çelik Kiriş, Kompozit Kiriş, Güçlendirme, HMCFRP, Kelepçe, |
| Steel Beam, Composite Beam, Reinforcing, HM-CFRP, Clamps, |
|
Engineering Sciences, Year : 2012, Volume : 7, Issue : 3, Published Date : 1.07.2012 |
|
|
GFRP KUTU PROFİLLER İLE BETONUN HİBRİT KULLANIMININ BETON KÜRÜNE ETKİLERİNİN İNCELENMESİ
INVESTIGATION OF CURE EFFECT IN HYBRID USE OF GFRP BOX PROFILES WITH CONCRETE |
| Hibrit Malzeme, Kompozit, Basınç Dayanımı, Beton Kürü, FRP, |
| Hyrbid Material, Composite, Concrete Cure, Compressive Strength, FRP, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
LİF TAKVİYELİ POLİMERLERİN BETONARME KİRİŞLERDE DONATI OLARAK KULLANIMI
THE USE OF FIBER REINFORCED POLYMERS AS THE REINFORCEMENT OF REINFORCED CONCRETE BEAMS |
| Lif Takviyeli Polimer(FRP), Kompozit Malzeme, Donatı, Moment-Eğrilik, Betonarme, |
| Fiber Reinforced Polymer(FRP), Composite Material, Reinforcement, Moment-Rotation, Reinforced Concrete, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
PETEK YAPILI SANDVİÇ YAPILARDA KÖPÜK DOLGUSUNUN KRİTİK BURKULMA YÜKÜNE ETKİSİ
EFFECT OF FOAM FILLING ON THE CRITIC BUCKLING LOAD OF THE HONEYCOMB SANDWICH STRUCTURES |
| Bal peteği sandviç yapılar, Köpük ilavesi, Kritik burkulma yükü, Basma testi, Kompozit malzeme, |
| Honeycomb sandwich structures, Foam addition, Critic buckling load, Compressive test, Composite material, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 1, Published Date : 1.01.2010 |
|
|
TOZ METALURJİSİ YÖNTEMİYLE SERAMİK TAKVİYELİ ALÜMİNYUM KOMPOZİT MALZEMELERİN ÜRETİMİ VE ÖZELLİKLERİNİN INCELENMESI
PRODUCTION OF CERAMIC REINFORCED ALUMINUM COMPOSITE MATERIALS BY USING POWDER METALLURGY METHOD AND DETERMINATION OF ITS PROPERTIES |
| Al-SiC kompozit, Al-FeBx Kompozit, Toz Metalurjisi, Mekanik Özellikler, Metalurji, |
| Al-SiC Composite, Al-FeBx Composite, Powder Metallurgy, Mechanical Properties, Metallurgy, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 3, Published Date : 1.07.2009 |
|
|
SICAK PRESLEME İLE ÜRETİLEN Cu-Al/B4C KOMPOZİTİN MİKROYAPI VE SERTLİK İNCELEMESİ
THE INVESTIGATION OF MICROSTRUCTURE AND HARDNESS OF Cu-Al/B4C COMPOSITES PRODUCED BY USING HOT PRESS |
| Cu matrisli kompozit,, B4C,, Toz metalurjisi,, Sıcak pres, ., |
| Cu matrix composite,, B4C,, Powder metallurgy,, Hot press, ., |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 1, Published Date : 1.01.2009 |
|
|
THE COMPARISON OF CERAMIC AND NON-CERAMIC INSULATORS
SERAMIK VE SERAMIK OLMAYAN İZOLATÖRLERIN KARŞILAŞTIRMASI |
| Composite (non-ceramic) insulator, silicone rubber, |
| Kompozit (seramik olmayan) izolatör, silikon kauçu, |
|
Engineering Sciences, Year : 2007, Volume : 2, Issue : 4, Published Date : 1.10.2007 |
|
|