+90(535) 849 84 68
nwsa.akademi@hotmail.com
Fırat Akademi Samsun-Türkiye
+90(535) 849 84 68nwsa.akademi@hotmail.com
Fırat Akademi Samsun-Türkiye
|
POWDER METALLURGICAL FABRICATION OF CO REINFORCED CUNISI MATRIX COMPOSITES: MICROSTRUCTURAL AND CORROSION CHARACTERIZATION
|
|
Mehmet Akkaş, Tarek Mousa K. TABONAH, Abdelsalam Mohamed A. ELFGHI, Cihan ÖZORAK |
| CuNiSi composites, Co reinforced, Powder metallurgy, Microstructure, Corrosion, |
|
Technological Applied Sciences, Year : 2023, Volume : 18, Issue : 4, Published Date : 1.10.2023 |
|
|
TANKLAR İÇİN SİNTER BALATA ÜRETİM VE KAREKTERİZASYONU
PRODUCTION AND CHARACTERIZATION OF SINTERED BRAKE PADS FOR TANKS |
| Bakır Matrisli Kompozit, Askeri Tank, Toz Metalurjisi, Balata, Sinter Balatalar, |
| Copper matrix composite, Military Tank, Powder Metallurgy, Brake, Sinter Lining, |
|
Technological Applied Sciences, Year : 2023, Volume : 18, Issue : 3, Published Date : 1.07.2023 |
|
|
|
CORROSION PROPERTIES OF Cu-Cr-B4C-CNF HYBRID COMPOSITES PRODUCED BY PM
|
| Hybrid composite, corrosion, microstructure, copper, powder metallurgy, |
|
Technological Applied Sciences, Year : 2022, Volume : 17, Issue : 2, Published Date : 1.04.2022 |
|
|
|
INVESTIGATION ON MECHANICAL PROPERTIES AND MICROSTRUCTURE OF BORON NITRIDE NANOPARTICLE REINFORCED ALUMINUM-BASED COMPOSITES
|
| Composite, Powder Metallurgy, Aluminum, Boron Nitride,, Microstructure, |
|
Engineering Sciences, Year : 2021, Volume : 16, Issue : 3, Published Date : 1.07.2021 |
|
|
ÇOK KATMANLI KARBON NANOTÜP TAKVİYELİ ALÜMİNYUM ESASLI KOMPOZİTLERİN MEKANİK ÖZELLİK VE MİKROYAPI İNCELEMESİ
INVESTIGATION OF MECHANICAL PROPERTIES AND MICROSTRUCTURE OF ALUMINUM BASED COMPOSITES REINFORCED WITH MULTI-WALLED CARBON NANOTUBES |
| Karbon Nanotüp, Alüminyum, Kompozit, Toz Metalürjisi, Mikroyapı, |
| Carbon Nanotube, Aluminum, Composite, Powder Metallurgy, Microstructure, |
|
Engineering Sciences, Year : 2021, Volume : 16, Issue : 1, Published Date : 1.01.2021 |
|
|
|
THE EFFECT OF SINTERING TIME ON TENSILE STRENGTH OF NB-V MICROALLOYED POWDER METALLURGY STEELS
|
| Powder Metallurgy, Nb-V Microalloyed Steels, Microstructure, Tensile Test, Sintering Time, |
|
Technological Applied Sciences, Year : 2020, Volume : 15, Issue : 1, Published Date : 1.01.2020 |
|
|
SIC TAKVIYELİ ALÜMINYUM ESASLI KOMPOZITLERIN MEKANİK ÖZELLİKLERİNİN VE MİKRO YAPISININ İNCELENMESİ
THE INVESTIGATION ON MECHANICAL PROPERTIES AND MICROSTUCTURE OF SIC REINFORCED ALUMINUM MATRIX COMPOSITES |
| Alüminyum, Silisyum Karbür, Toz Metalürjisi, Kompozit, Sertlik, |
| Aluminum, Silicon Carbide, Powder Metallurgy, Composite, Hardness, |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 2, Published Date : 1.04.2018 |
|
|
MEKANİK ALAŞIMLAMA/ÖĞÜTME YÖNTEMİ İLE ÜRETİLEN Al-SiC KOMPOZİTLERİN İNCELENMESİ
AN INVESTIGATION OF Al-SiC COMPOSITES PRODUCED BY MECHANICAL ALLOYING/MECHANICAL MILLING METHOD |
|
İjlal ŞİMŞEK, MUSA YILDIRIM, Tansel TUNÇAY, Dursun ÖZYÜREK, Doğan ŞİMŞEK |
| Alüminyum Kompozit, Mekanik Öğütme, Toz Metalürjisi, Atritör, SiC, |
| Aluminum Composite, Mechanical Milling, Powder Metallurgy,, Attritor, SiC, |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 2, Published Date : 1.04.2018 |
|
|
TOZ METALURJİSİ YÖNTEMİYLE ÜRETİLEN ZA27/GRAFEN NANOKOMPOZİTLERİN KOROZYON DAVRANIŞI
CORROSION BEHAVIOR OF ZA27/GRAFEN NANOCOMPOSITES PRODUCED BY POWDER METALLURGY |
| ZA27 Alaşımı, Grafen Nanolevha, Toz Metalurjisi, Korozyon, Nanokompozit, |
| ZA27 Alloy, Graphene Nanosheet, Powder Metallurgy, Corrosion, Nanocomposites, |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 2, Published Date : 1.04.2018 |
|
|
|
PRODUCTION AND PROPERTIES OF AL2024-2 WT.% (SiC-B4C) HYBRID NANOCOMPOSITE
|
|
Abdullah Hasan KARABACAK, Aykut ÇANAKÇI, Serdar ÖZKAYA, Müslim ÇELEBİ, Emre Deniz YALÇIN |
| Powder metallurgy, SiC, Nanocomposite, B4C, Hybrid, |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 1, Published Date : 1.01.2018 |
|
|
|
EFFECT OF TIN ADDITION ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF PM STEELS
|
|
Mustafa TÜRKMEN, Hasan KARABULUT, Mehmet Akif ERDEN, Süleyman GÜNDÜZ |
| Powder Metallurgy, Microalloyed Steel, Tensile Strength, SEM, EDS, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 4, Published Date : 1.10.2017 |
|
|
TiB2-B4C KOMPOZİT TOZLARININ KARBÜR BORLAMA YÖNTEMİYLE ÜRETİLMESİ
PRODUCTION OF TiB2-B4C COMPOSITE POWDERS BY THE CARBIDE BORONIZING PROCESS |
| Amorf B, B4C, TiB2, Kompozit Toz, Karbür Borlama , |
| Amorph B, B4C, TiB2, Composite Powders, Carbide Boronizing, |
|
Engineering Sciences, Year : 2017, Volume : 12, Issue : 3, Published Date : 1.07.2017 |
|
|
TOZ METALURJİSİ İLE ÜRETİLEN Cu-FeB KOMPOZİT MALZEMELERİN MİKROYAPI VE ELEKTRİKSEL ÖZELLİKLERİNİN İNCELENMESİ
INVESTIGATION OF MICROSTRUCTURE AND ELECTRICAL CHARACTERISTICS OF Cu-FeB COMPOSITE MATERIALS PRODUCED BY POWDER METALLURGY |
| Toz Metalurjisi, Metal Matrisli Kompozit, Elektriksel Özellikler,, Cu , FeB , |
| Powder Metallurgy , Metal Matrix Composite, Electrical Properties, Cu , FeB, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 2, Published Date : 1.04.2017 |
|
|
AlC İLAVE EDİLEN TOZ METAL ÇELİKLERDE KARBON ORANININ MİKROYAPI VE MEKANİK ÖZELLİKLER ÜZERİNE ETKİSİNİN ARAŞTIRILMASI
INVESTIGATION OF THE EFFECT OF CARBON CONTENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AlC ADDED POWDER METALLURGY STEELS |
|
Mehmet Akif ERDEN, Mustafa TÜRKMEN, Hasan KARABULUT, Süleyman GÜNDÜZ |
| Toz metalürjisi, Toz Metalürjisi Çelikleri, AlC, Mikroyapı, Mekanik özellikler, |
| Powder Metallurgy, , Powder Metallurgy Steels, ALC, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2016, Volume : 11, Issue : 4, Published Date : 1.10.2016 |
|
|
BAZALT AGREGASI KULLANILARAK ÜRETİLMİŞ REAKTİF PUDRA BETONUNA FARKLI BOYUTLARDAKİ ÇELİK LİFİN VE SIKIŞTIRMA BASINCININ ETKİSİ
THE EFFECT OF DIFFERENT STEEL FIBERS SIZE WITH PRE-SETTING PRESSURE ON BASALT AGGREGATE CREATED USING THE REACTİVE POWDER CONCRETE |
| Reaktif pudra betonu, Sıkıştırma Basıncı, Lif, Eğilme Dayanımı, Tokluk, |
| Reactive powder concrete, Pre-setting pressure, Fibre, Flexural strength, Toughness, |
|
Technological Applied Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
TOZ METALURJİSİ YÖNTEMİYLE SERAMİK TAKVİYELİ ALÜMİNYUM KOMPOZİT MALZEMELERİN ÜRETİMİ VE ÖZELLİKLERİNİN INCELENMESI
PRODUCTION OF CERAMIC REINFORCED ALUMINUM COMPOSITE MATERIALS BY USING POWDER METALLURGY METHOD AND DETERMINATION OF ITS PROPERTIES |
| Al-SiC kompozit, Al-FeBx Kompozit, Toz Metalurjisi, Mekanik Özellikler, Metalurji, |
| Al-SiC Composite, Al-FeBx Composite, Powder Metallurgy, Mechanical Properties, Metallurgy, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 3, Published Date : 1.07.2009 |
|
|
GTA YÖNTEMİ KULLANILARAK ÜRETİLEN SiC(p) ESASLI KAPLAMALARIN AŞINMA DAVRANIŞLARININ İNCELENMESİ
THE INVESTIGATION OF WEAR BEHAVIOURS OF SiC(p) BASED COATINGS PRODUCED BY GTA WELDING PROCESS |
| GTA yöntemi, enerji girdisi, yüzey alaşımlama, abrasiv aşınma, SiC tozu, |
| GTA process, energy input, surface alloying, abrasive wear, SiC powder, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 2, Published Date : 1.04.2009 |
|
|
Tİ51Nİ49 KOMPOZİTİNİN CU-Nİ ARA TABAKALI DİFÜZYON KAYNAĞINDA SICAKLIK VE SÜRENİN BİRLEŞMEYE ETKİSİNİN ARAŞTIRILMASI
THE INVESTIGATION OF THE EFFECT ON THE JOINING OF TEMPERATURE AND PERIOD ON THE Cu-Ni INTERLAYER DIFFUSION BONDING OF Ti51Ni49COMPOSITE |
| Ti51Ni49, Toz Metalurjisi, Cu-Ni Ara Tabaka, Ti51Ni49, Difüzyon Kaynağı, Mikroyapı, |
| Ti51Ni49, Powder Metallurgy, Cu-Ni Interlayer, Microstructure, Bonding, |
|
Technological Applied Sciences, Year : 2009, Volume : 4, Issue : 2, Published Date : 1.04.2009 |
|
|
TOZ PÜSKÜRTME YÖNTEMİ İLE ÜRETİLMİŞ PB-SN-CU-ZRO ALAŞIMLI KRANK MİLİ ANA YATAĞININ AŞINMA DAVRANIŞLARI
WEAR BEHAVIOURS OF PB-SN-CU-ZRO ALLOYS CRANK SHAFT MAIN BEARING MANUFACTURED BY POWDER SPRAYING |
| Krank Mili Ana Yatak Malzemesi, Toz Püskürtme, Aşınma, -, -, |
| Crank Shaft Main Bearing Metarial, Powder Spray, WEAR, -, -, |
|
Technological Applied Sciences, Year : 2009, Volume : 4, Issue : 2, Published Date : 1.04.2009 |
|
|
SICAK PRESLEME İLE ÜRETİLEN Cu-Al/B4C KOMPOZİTİN MİKROYAPI VE SERTLİK İNCELEMESİ
THE INVESTIGATION OF MICROSTRUCTURE AND HARDNESS OF Cu-Al/B4C COMPOSITES PRODUCED BY USING HOT PRESS |
| Cu matrisli kompozit,, B4C,, Toz metalurjisi,, Sıcak pres, ., |
| Cu matrix composite,, B4C,, Powder metallurgy,, Hot press, ., |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 1, Published Date : 1.01.2009 |
|
|
SOĞUK PRESLEME YÖNTEMİYLE ÜRETİLMİŞ Ni-Ti-Cu KOMPOZİTLERİN TLP DİFÜZYON KAYNAĞINDA SICAKLIĞIN BİRLEŞME ÜZERİNDEKİ ETKİSİNİN İNCELENMESİ
THE EFFECT OF TEMPERATURES ON THE TLP DIFFUSION BONDING OF Ni-Ti-Cu COMPOSITES MANUFACTURED BY COLD PRESSING METHOD |
| Ni-Ti-Cu,, Toz Metalurjisi,, Soğuk Presleme,, TLP Difüzyon Kaynağı,, Mekanik Özellikler., |
| Ni-Ti-Cu,, Powder Metallurgy,, Cold Pressing,, TLP Diffusion Bonding,, Mechanical Properties., |
|
Engineering Sciences, Year : 2008, Volume : 3, Issue : 4, Published Date : 1.10.2008 |
|
|
Ti45.2Ni49.1Cu5.7 KOMPOZİTİNİN 910-940-970 ºC SICAKLIKLARDA Cu-Ni FOLYOLU DİFÜZYON KAYNAĞINDA SICAKLIK VE SÜRENİN BİRLEŞMEYE ETKİSIİN ARAŞTIRILMASI
THE INVESTIGATION OF THE EFFECT ON THE JOINING OF TEMPERATURE AND PERIOD ON THE Cu-Ni FOILS DIFFUSION BONDING AT 910-940-970 ºC TEMPERATURES OF Ti45.2Ni49.1Cu5.7 COMPOSITE |
| Ti45.2Ni49.1Cu5.7, Toz Metalurjisi, Difüzyon Kayna, |
| Ti45.2Ni49.1Cu5.7, Powder Metallurgy, Diffusion Bo, |
|
Engineering Sciences, Year : 2008, Volume : 3, Issue : 3, Published Date : 1.07.2008 |
|
|