+90(535) 849 84 68
nwsa.akademi@hotmail.com
Fırat Akademi Samsun-Türkiye
+90(535) 849 84 68nwsa.akademi@hotmail.com
Fırat Akademi Samsun-Türkiye
OLİVİN İKAMELİ BETONLARIN YÜKSEK SICAKLIK SONRASI DEĞERLENDİRMESİ
EVALUATION OF OLIVINE SUBSTITUTED CONCRETES AFTER HIGH TEMPERATURE |
| Olivin Atığı, Basınç Dayanımı, Yüksek Sıcaklık, Mikroyapı, Beton, |
| Olivine Waste, Compressive Strength, High Temperature, Microstructure, Concrete, |
|
Engineering Sciences, Year : 2024, Volume : 19, Issue : 3, Published Date : 1.07.2024 |
|
|
|
POWDER METALLURGICAL FABRICATION OF CO REINFORCED CUNISI MATRIX COMPOSITES: MICROSTRUCTURAL AND CORROSION CHARACTERIZATION
|
|
Mehmet Akkaş, Tarek Mousa K. TABONAH, Abdelsalam Mohamed A. ELFGHI, Cihan ÖZORAK |
| CuNiSi composites, Co reinforced, Powder metallurgy, Microstructure, Corrosion, |
|
Technological Applied Sciences, Year : 2023, Volume : 18, Issue : 4, Published Date : 1.10.2023 |
|
|
FİZİKSEL RİSK ETMENLERİ VE ERGONOMİK AÇIDAN KAMU VE ÖZEL LİSELERİN KARŞILAŞTIRILMASI
COMPARISON OF PUBLIC AND PRIVATE HIGH SCHOOLS IN PHYSICAL RISK FACTORS AND ERGONOMICS |
| Liselerde Ergonomi, Aydınlık Düzeyi, Okulda Gürültü, Okulda Ses Yalıtımı, Eğitim Yapıları, |
| Ergonomics in High Schools, Luminous Level, Noise in School, Sound Insulation at School, Educational Structures, |
|
Technological Applied Sciences, Year : 2023, Volume : 18, Issue : 3, Published Date : 1.07.2023 |
|
|
AISI 2205 VE AISI 8640 ÇELİK ÇİFTİNİN SÜRTÜNME SAPLAMA KAYNAĞI İLE KAYNAK EDİLEBİLİRLİĞİNİN ARAŞTIRILMASI
INVESTIGATION OF THE WELDABILITY OF AISI 2205 AND AISI 8640 STEEL COUPLE BY FRICTION STUD WELDING |
| Dubleks Paslanmaz Çelik, , Mikroyapı, AISI 8640, Sürtünme Saplama Kaynağı , AISI 2205, |
| Duplex Stainless Steel, Microstructure, AISI 8640, Friction Stud Welding, AISI 2205, |
|
Technological Applied Sciences, Year : 2023, Volume : 18, Issue : 2, Published Date : 1.04.2023 |
|
|
SÜRTÜNME SAPLAMA KAYNAĞI İLE BİRLEŞTİRİLEN DUBLEKS PASLANMAZ ÇELİĞİ VE ISLAH ÇELİKLERİNİN MİKROYAPI İNCELEMESİ
MICROSTRUCTURAL INVESTIGATION OF DUPLEX STAINLESS STEEL AND TEMPERED STEELS COMBINED BY FRICTION STUD WELDING |
| Mikroyapı, Mikrosertlik , Sürtünme Saplama Kaynağı, Dubleks Paslanmaz Çelik, Islah Çeliği, |
| Microstructure, Microhardness, Friction Stud Welding, Duplex Stainless Steel, Tempered Steel, |
|
Technological Applied Sciences, Year : 2023, Volume : 18, Issue : 1, Published Date : 1.01.2023 |
|
|
DİKENLİ TATLISU YILAN BALIĞI (Mastacembalus mastacembalus, Bank ve Solander, 1794)’IN SOLUNGAÇLARININ HİSTOLOJİK YAPISI VE BAZI HİSTOKİMYASAL ÖZELLİKLERİ
INVESTIGATION OF HISTOLOGY STRUCTURE AND SOME HISTOCHEMICAL CHARACTERISTICS OF GILLS IN THE SPINY EEL, (Mastacembalus mastacembalus, Bank and Bolander, 1794) |
| Mastacembalus mastacembalus, Solungaç, Histoloji, Yapı, Histokimya, |
| Mastacembalus mastacembalus, Gill, Histology, Structure, Histochemistry, |
|
Ecological Life Sciences, Year : 2022, Volume : 17, Issue : 4, Published Date : 1.10.2022 |
|
|
Ti6Al4V TİTANYUM ALAŞIMI İLE AISI 304 PASLANMAZ ÇELİĞİNİN DİFÜZYON KAYNAĞI İLE BİRLEŞTİRİLEBİLİRLİĞİNİN İNCELENMESİ
INVESTIGATION OF JOINABILITY OF TI6AL4V TITANIUM ALLOY AND AISI 304 STAINLESS STEEL BY DIFFUSION WELDING |
| Difüzyon Kaynağı, Ti6Al4V Titanyum Alaşımı, AISI 304 Paslanmaz Çelik, Mikroyapı, Mikrosertlik, |
| Diffusion Welding, Ti6Al4V Titanium Alloy, AISI 304 Stainless Steel, Mikrostructure, Mikrohardness, |
|
Technological Applied Sciences, Year : 2022, Volume : 17, Issue : 3, Published Date : 1.07.2022 |
|
|
|
CORROSION PROPERTIES OF Cu-Cr-B4C-CNF HYBRID COMPOSITES PRODUCED BY PM
|
| Hybrid composite, corrosion, microstructure, copper, powder metallurgy, |
|
Technological Applied Sciences, Year : 2022, Volume : 17, Issue : 2, Published Date : 1.04.2022 |
|
|
|
INVESTIGATION ON MECHANICAL PROPERTIES AND MICROSTRUCTURE OF BORON NITRIDE NANOPARTICLE REINFORCED ALUMINUM-BASED COMPOSITES
|
| Composite, Powder Metallurgy, Aluminum, Boron Nitride,, Microstructure, |
|
Engineering Sciences, Year : 2021, Volume : 16, Issue : 3, Published Date : 1.07.2021 |
|
|
ÇOK KATMANLI KARBON NANOTÜP TAKVİYELİ ALÜMİNYUM ESASLI KOMPOZİTLERİN MEKANİK ÖZELLİK VE MİKROYAPI İNCELEMESİ
INVESTIGATION OF MECHANICAL PROPERTIES AND MICROSTRUCTURE OF ALUMINUM BASED COMPOSITES REINFORCED WITH MULTI-WALLED CARBON NANOTUBES |
| Karbon Nanotüp, Alüminyum, Kompozit, Toz Metalürjisi, Mikroyapı, |
| Carbon Nanotube, Aluminum, Composite, Powder Metallurgy, Microstructure, |
|
Engineering Sciences, Year : 2021, Volume : 16, Issue : 1, Published Date : 1.01.2021 |
|
|
|
AN EXPERIMENTAL STUDY ON TREATMENT OF DOMESTIC WASTEWATER BY NATURAL SOIL
|
| Soil Filtration, Wastewater Treatment, Water Quality, Domestic Wastewater,, Soil Structure , |
|
Engineering Sciences, Year : 2020, Volume : 15, Issue : 4, Published Date : 1.10.2020 |
|
|
PASLANMAZ ÇELİK İLE DÜŞÜK KARBONLU ÇELİK MALZEMELERİN MIG KAYNAK YÖNTEMİYLE BİRLEŞTİRİLEBİLİRLİĞİNİN İNCELENMESİ
AN INVESTIGATION OF JOINABILITY OF STAINLESS STEEL AND THE LOW CARBON STEEL MATERIALS BY MIG WELDING METHOD |
|
Yakup KAYA, GÖKHAN ÇAYIRHAN, Mehmet BÖKÜ, Nizamettin KAHRAMAN |
| MIG Kaynağı, Paslanmaz Çelik, Düşük Karbonlu Çelik, Mekanik Özellikle, Mikroyapı, |
| MIG welding, Stainless Steel, Low Carbon Steel, Mechanical Properties, Microstructure, |
|
Engineering Sciences, Year : 2020, Volume : 15, Issue : 2, Published Date : 1.04.2020 |
|
|
|
THE EFFECT OF SINTERING TIME ON TENSILE STRENGTH OF NB-V MICROALLOYED POWDER METALLURGY STEELS
|
| Powder Metallurgy, Nb-V Microalloyed Steels, Microstructure, Tensile Test, Sintering Time, |
|
Technological Applied Sciences, Year : 2020, Volume : 15, Issue : 1, Published Date : 1.01.2020 |
|
|
HAZAR GÖLÜ (ELAZIĞ/TÜRKİYE) BALIKÇILARININ SOSYO-EKONOMİK VE SOSYO-DEMOGRAFİK YAPISI
THE STRUCTURE OF SOCIO-ECONOMIC AND SOCIO-DEMOGRAPHIC OF FISHERMEN IN LAKE HAZAR (ELAZIG-TURKEY) |
| Balıkçı, Sosyo-Ekonomik Yapı, Hazar Gölü, Elazığ, Sosyo-Demografik Yapı, |
| Socio-economic Structure, Fishermen, Lake Hazar, Elazığ, Socio-Demographical Structure, |
|
Ecological Life Sciences, Year : 2019, Volume : 14, Issue : 4, Published Date : 1.10.2019 |
|
|
|
BREAKING THE GLASS CEILING: PARTICIPATION OF PAKISTANI SIKHS ETHNIC GROUP IN HIGHER EDUCATION
|
| Glass Ceiling,, Semi-Structured Interviews, Sikh Ethnic Group, Qualitative Study, Higher Education, |
|
Social Sciences, Year : 2019, Volume : 14, Issue : 2, Published Date : 1.04.2019 |
|
|
SICAK DÖVME SONRASI KUMDA VE HAVADA SOĞUTULAN ÇELİKLERİN KESME KUVVETLERİ VE YÜZEY PÜRÜZLÜLÜK DEĞERLERİNİN İNCELENMESİ
THE INVESTIGATION OF SURFACE ROUGHNESS AND CUTTING FORCES OF STEELS COOLED IN SAND AND AIR AFTER HOT FORGING |
| Sıcak Dövme, Mikroyapı, İşlenebilirlik, Çelik, , Karbür, |
| Hot Forging, Microstructure, Machinability, Steel, Carbide, |
|
Technological Applied Sciences, Year : 2019, Volume : 14, Issue : 2, Published Date : 1.04.2019 |
|
|
|
IMPLEMENTATION OF CASE-BASED LEARNING (CBL) METHOD IN ANALYTICAL CHEMISTRY LABORATORY COURSE
|
| Acid-Bases Titrations, Analytical Chemistry Laboratory, Case-Based Laboratory Practices , Science Teaching Students, Structured Interview, |
|
Education Sciences, Year : 2019, Volume : 14, Issue : 1, Published Date : 1.01.2019 |
|
|
|
USAGE OF UNMANNED AERIAL VEHICLES (UAVs) IN DETERMINING DRAINAGE NETWORKS
|
|
Mehmet Akif GÜNEN, Ümit Haluk ATASEVER, Talha TAŞKANAT, Erkan BEŞDOK |
| Digital Elevation Model (DEM), Unmanned Aerial Vehicles (UAVs), Drainage Network, Structure from Motion (SfM), Map, |
|
Nature Sciences, Year : 2019, Volume : 14, Issue : 1, Published Date : 1.01.2019 |
|
|
HASSAS DÖKÜM YÖNTEMİ İLE ÜRETİLEN ALAŞIMLARIN MİKROYAPI VE SERTLİK ÖZELLİKLERİNİN ARAŞTIRILMASI
THE INVESTIGATION OF MICROSTRUCTURE AND HARDNESS PROPERTIES OF ALLOYS PRODUCED BY INVESTMENT CASTING METHOD |
| Hassas Döküm, Mikroyapı, Sertlik, Alaşım, Metal, |
| Investment Casting, Microstructure, Hardness, Alloy, Metal, |
|
Technological Applied Sciences, Year : 2019, Volume : 14, Issue : 1, Published Date : 1.01.2019 |
|
|
İLKOKUL ÖĞRENCİLERİNİN KELİME İLİŞKİLENDİRME TESTİ İLE “NOTA” KAVRAMI KONUSUNDAKİ BİLİŞSEL YAPILARININ BELİRLENMESİ
IDENTIFYING PRIMARY SCHOOL STUDENTS’ COGNITIVE STRUCTURE ORIENTED TO NOTE CONCEPT WITH WORD ASSOCIATION TEST |
| Müzik Eğitimi, Nota, İlkokul, Kelime İlişkilendirme Testi, İzmir, |
| Music Education, Musical Note, Word Association Test, Cognitive Structure, İzmir, |
|
Fine Arts, Year : 2018, Volume : 13, Issue : 4, Published Date : 1.10.2018 |
|
|
|
EFFECT OF ORIENTATION ANGLES ON VIBRATION PROPERTIES AT CARBON FIBER REINFORCED POLYMERIC COMPOSITES
|
|
Muhammet Raci Aydın, ÖMER GÜNDOĞDU, BARBAROS KAYA, GÜRBÜZ BAYRAKTAR, OKAN KAAN AKSUOĞLU, OSMAN HOTUNLU |
| Laminated Composite Structure,, Fiber Orientation Angle, Vibration Properties, Damding Ratio, Flexural Stress, |
|
Engineering Sciences, Year : 2018, Volume : 13, Issue : 3, Published Date : 1.07.2018 |
|
|
TRIP VE DP ÇELİKLERİNDE DİRENÇ NOKTA KAYNAĞI PARAMETRELERİNİN MEKANİK ÖZELLİKLERE ETKİSİ
EFFECT OF THE RESISTANCE SPOT WELDING PARAMETERS IN TRIP AND DP STEELS ON MECHANICAL PROPERTIES |
| DP ve TRIP çelikleri, Direnç Nokta Kaynağı, Gelişmiş Yüksek Mukavemetli Çelikler, Mikroyapı, Mekanik Özellikler, |
| DP and TRIP Steels, Resistance Spot Welding, Advanced High Strength Steel (AHSS), Microstructure, Mechanical Properties, |
|
Engineering Sciences, Year : 2018, Volume : 13, Issue : 3, Published Date : 1.07.2018 |
|
|
|
DISCRETE AND CONTINUOUS DESIGN OPTIMIZATION OF TOWER STRUCTURES USING THE JAYA ALGORITHM
|
|
Sadık Özgür DEGERTEKIN , Luciano LAMBERTİ, İbrahim Behram UĞUR |
| Design Optimization, Discrete Design Variables, Continuous Design Variables, Tower Structures, Jaya Algorithm, |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 2, Published Date : 1.04.2018 |
|
|
ELEKTRİK TESİSAT VE KOMPANZASYON MODÜLER EĞİTİM SETİ TASARIMI VE UYGULAMASI
DESIGN AND APPLICATION OF ELECTRICITY INSTALLATION AND COMPENSATION MODULAR TRAINING SETS |
| Mesleki ve Teknik Eğitim, Elektrik Eğitimi, Elektrik tesisatı, Kompanzasyon, Modüler Yapılar, |
| Vocational and Technical Education, Education onElectricity, Electrical Installation, Compensation, Modular Structures, |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 2, Published Date : 1.04.2018 |
|
|
ÜÇ BOYUTLU ZEMİN-YAPI SİSTEMLERİNDE AKTİF YÖNTEMLERLE TİTREŞİM İZOLASYONU SAĞLANABİLİRLİĞİNİN ARAŞTIRILMASI
THE INVESTIGATION OF VIBRATION ISOLATION IN THREE DIMENSIONAL SOIL-STRUCTURE SYSTEMS BY ACTIVE METHODS |
| Titreşim Yalıtımı , Zemin-Yapı Etkileşimi, Sonlu Elemanlar, Geçirgen Sınırlar, Çukur Geometrisi , |
| Vibration Isolation, Soil-Structure Interaction, Finite Elements, Transparent Boundaries, Geometry of Trench , |
|
Technological Applied Sciences, Year : 2018, Volume : 13, Issue : 2, Published Date : 1.04.2018 |
|
|
ISIL İŞLEM UYGULANMIŞ ORTA KARBONLU ÇELİKTE MİKROYAPI DEĞİŞİMİNİN BULANIK MANTIK İLE TAHMİN EDİLMESİ
ESTIMATION WITH FUZZY LOGIC OF THE MICROSTRUCTURE CHANGE IN HEAT TREATED MEDIUM CARBON STEEL |
| Isıl işlem, Mikroyapı, Bulanık Mantık, Orta Karbonlu Çelik, Mamdani Yöntemi, |
| Heat treatment, Microstructure, Fuzzy logic, Medium Carbon Steel, Mamdani method , |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 4, Published Date : 1.10.2017 |
|
|
BEDENSEL ENGELLİLER AÇISINDAN BİR EĞİTİM KURUMUNUN ULAŞILABİLİRLİK VE KULLANILABİLİRLİĞİNİN İNCELENMESİ
EXAMINATION OF THE ACCESSIBILITY AND THE AVAILABILITY OF AN EDUCATIONAL INSTITUTION IN TERMS OF PHYSICAL DISABILITIES |
| Biyoharmoloji, Mekansal Kriterler, Engell Bireyler, Eğitim Yapıları, Bedensel Engelliler , |
| Bioharmology, Spatially Criteria, Individuals with Disabilities, Educational Structures, Physical Disabilities, |
|
Engineering Sciences, Year : 2017, Volume : 12, Issue : 3, Published Date : 1.07.2017 |
|
|
Ti6Al4V ALAŞIMININ FİBER LAZER KAYNAK KABİLİYETİ
FIBER LASER WELDABILITY OF Ti6Al4V ALLOY |
| Titanyum, Ti6Al4V Alaşımı, Mikroyapı, Fiber Lazer Kaynak, Mekanik Özellikler, |
| Titanium, Ti6Al4V Alloy,, Microstructure, Fiber Laser Welding, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 3, Published Date : 1.07.2017 |
|
|
|
OPTIMUM DESIGN OF INDUSTRIAL STRUCTURES VIA HARMONY SEARCH ALGORITHM INCLUDING CORROSION EFFECT
|
| Optimum Design, Harmony Search Algorithm, Corrosion Effect, Industrial Structure,, AISC , |
|
Technological Applied Sciences, Year : 2017, Volume : 12, Issue : 3, Published Date : 1.07.2017 |
|
|
FARKLI KUYRUK MODELLERİNE SAHİP BİR ROBOT BALIĞIN FSI ANALİZİ
FSI ANALYSIS OF A ROBOT FISH WITH DIFFERENT TAIL MODELS |
|
MUSTAFA AY, GONCA ÖZMEN KOCA, Seda YETKİN, Cafer Bal , Z.Hakan Akpolat |
| Robot Balık, Carangiform Yüzüş Modu, Akışkan-Yapı Analizi (FSI),, Hesaplamalı Akışkanlar Dinamiği (HAD), ANSYS, |
| Robotic Fish, Carangiform Swimming Mode, Fluid Structure Analysis (FSI), Computational Fluid Dynamics(CFD), ANSYS, |
|
Engineering Sciences, Year : 2017, Volume : 12, Issue : 1, Published Date : 1.01.2017 |
|
|
1260-61/1844-45 TEMETTUAT KAYITLARI IŞIĞINDA KARACALI VE EYNE GAZİLÜ KÖYLERİNİN SOSYAL VE EKONOMİK GÖRÜNTÜSÜ
SOCIAL AND ECONOMIC FEATURES OF KARACALI AND EYNE GAZILÜ VILLAGES IN THE CONSIDERATION OF 1260-61/1844 TEMETTUAT REGISTERS |
| Temettüat Defteri, Hane, Vergi, Karye, Sosyal Yapı, |
| Temettuat Registers, Section, Tax, Village, Social Structure, |
|
Humanities Sciences, Year : 2017, Volume : 12, Issue : 1, Published Date : 1.01.2017 |
|
|
LAZER KAYNAĞI İLE BİRLEŞTİRİLEN AISI 2205 DUBLEKS PASLANMAZ ÇELİĞİN MEKANİK VE MİKROYAPI ÖZELLİKLERİNİN İNCELENMESİ
INVESTIGATION OF THE MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF LASER BEAM WELDED AISI 2205 DUPLEX STAINLESS STEEL |
| Paslanmaz Çelik , AISI 2205, CO2 Lazer Kaynağı, Mekanik Özellikler, Mikroyapı, |
| Stainless Steel, AISI 2205, CO2 Laser Beam Welding, Mechanical Properties, Microstructure, |
|
Technological Applied Sciences, Year : 2016, Volume : 11, Issue : 4, Published Date : 1.10.2016 |
|
|
AlC İLAVE EDİLEN TOZ METAL ÇELİKLERDE KARBON ORANININ MİKROYAPI VE MEKANİK ÖZELLİKLER ÜZERİNE ETKİSİNİN ARAŞTIRILMASI
INVESTIGATION OF THE EFFECT OF CARBON CONTENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AlC ADDED POWDER METALLURGY STEELS |
|
Mehmet Akif ERDEN, Mustafa TÜRKMEN, Hasan KARABULUT, Süleyman GÜNDÜZ |
| Toz metalürjisi, Toz Metalürjisi Çelikleri, AlC, Mikroyapı, Mekanik özellikler, |
| Powder Metallurgy, , Powder Metallurgy Steels, ALC, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2016, Volume : 11, Issue : 4, Published Date : 1.10.2016 |
|
|
TRD YÖNTEMİYLE SUPAP ÇELİĞİ YÜZEYİNDE ÜRETİLEN KAPLAMALARIN MİKROYAPI VE AŞINMA ÖZELLİKLERİ
MICROSTRUCTURE AND WEAR PROPERTIES OF COATINGS ON VALVE STEEL PRODUCED BY TRD METHOD |
|
Serkan ISLAK, Cihan ÖZORAK, Cihangir Tevfik SEZGİN, Mehmet AKKAŞ |
| TRD, Kaplama, Supap, Mikroyapı, Aşınma, |
| TRD, Coating, Valve, Microstructure, Wear, |
|
Technological Applied Sciences, Year : 2016, Volume : 11, Issue : 3, Published Date : 1.07.2016 |
|
|
AISI 420 MARTENZİTİK PASLANMAZ ÇELİĞİN CO2 LAZER IŞINI KAYNAK YÖNTEMİYLE KAYNAK KABİLİYETİNİN ARAŞTIRILMASI
AN INVESTIGATION OF CO2 LASER BEAM WELDING METHOD OF AISI 420 MARTENSITIC STAINLESS STEEL |
| Lazer Kaynağı, Martenzitik Paslanmaz Çelik, Isıl İşlem, Mikroyapı, Mekanik Özellikler, |
| Laser Welding, Martensitic Stainless Steel, Heat Treatment, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2015, Volume : 10, Issue : 4, Published Date : 1.10.2015 |
|
|
ROBOTİK MIG KAYNAK YÖNTEMİ İLE BİRLEŞTİRİLEN 5754 ALÜMİNYUM ALAŞIMININ MEKANİK VE MİKROYAPI ÖZELLİKLERİNE KAYNAK HIZININ ETKİSİ
THE EFFECT OF WELDING SPEED ON THE MECHANICAL AND MICROSTRUCTURE PROPERTIES OF ROBOTIC GMAW WELDED 5754 AlUMINIUM ALLOY |
| Alüminyum ve Alaşımları, Robotik, MIG, Mikroyapı, Mekanik Özellikler., |
| Aluminium and Alloy, Robotic, MIG, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2015, Volume : 10, Issue : 1, Published Date : 1.01.2015 |
|
|
AISI 420 MARTENZİTİK PASLANMAZ ÇELİĞİN SÜRTÜNME KAYNAK YÖNTEMİ İLE BİRLEŞTİRİLEBİLİRLİĞİNİN ARAŞTIRILMASI
INVESTIGATION OF JOINABILITY BY FRICTION WELDING METHOD OF AISI 420 MARTENSITIC STAINLESS STEEL |
| Martenzitik paslanmaz çelik, AISI 420, Sürtünme Kaynağı, Mikroyapı, Mekanik Özellikler, |
| Martensitic stainless steel, AISI 420, Friction Welding, Microstructure, Mechanical Properties, |
|
Technological Applied Sciences, Year : 2014, Volume : 9, Issue : 3, Published Date : 1.07.2014 |
|
|
ÇELİK YAPILARIN YANGINA KARŞI KORUNMA YÖNTEMLERİNİN DEĞERLENDİRİLMESİ
EVALUATION OF FIRE PROTECTION METHODS OF STEEL STRUCTURES |
| Çelik Strüktür, Yangın Korunumu, Döşeme Sistemleri, Çelik Profil Tipleri, Aktif ve Pasif Yöntemler, |
| Steel Structure, Fire Protection, Flooring Systems, Steel Section Types, Active and Passive Methods, |
|
Engineering Sciences, Year : 2013, Volume : 8, Issue : 3, Published Date : 1.07.2013 |
|
|
ÇELİK STRÜKTÜRLERİN YAŞAM DÖNGÜSÜ İÇİNDE SÜRDÜRÜLEBİLİRLİĞİNİN DEĞERLENDİRİLMESİ
LIFE CYCLE ASSESMENT OF STEEL STRUCTURES WITHIN THE FRAMEWORK OF SUSTAINABILTY |
| Çelik Strüktür, Yaşam Döngösü, Sürdürülebilirlik, Yapı, Yapı Tasarımı, |
| Steel Structures, Life Cycle Assessment, Sustainability, Construction, Construction Design, |
|
Engineering Sciences, Year : 2013, Volume : 8, Issue : 2, Published Date : 1.04.2013 |
|
|
AISI 2205 / AISI 1020 MALZEME ÇİFTİNİN SÜRTÜNRME KAYNAĞI İLE BİRLEŞTİRİLMESİ
A PAIR OF AISI 2205 / AISI 1020 METARIAL COMBINATION WITH FRICTION WELDING METHOD |
| Sürtünme Kaynağı, AISI 2205, Dubleks Paslanmaz Çelikler, AISI 1020, Mikroyapı, |
| Friction Welding, AISI 2205, Duplex Stainless Steels, AISI 1020, Microstructure, |
|
Technological Applied Sciences, Year : 2013, Volume : 8, Issue : 2, Published Date : 1.04.2013 |
|
|
SÜRTÜNMELİ DELMEDE MİKRO YAPI VE MİKRO SERTLİĞİN ARAŞTIRILMASI
INVESTIGATION THE MICRO HARDNESS AND MICRO STRUCTURE IN FRICTION DRILLING |
| Sürtünmeli Delme, Mikro sertlik, Mikro yapı, Devir sayısı, Koniklik açısı, |
| Friction drilling, Micro hardness, Micro structure, Spindle speed, Conical angle, |
|
Engineering Sciences, Year : 2013, Volume : 8, Issue : 1, Published Date : 1.01.2013 |
|
|
AĞIRLIK MALZEMELERİYLE KANUN ÇALIŞMANIN İCRAYA VE FİZYOLOJİK YAPIYA ETKİLERİ
THE EFFECTS OF PRACTICING QANUN WITH WEIGHTING MATERIALS ON THE PERFORMANCE AND THE PHYSIOLOGICAL STRUCTURES |
| Kanun, Müzik, Ağırlık malzemesi, İcra, Fizyolojik yapı, |
| Qanun, Music, Weighting material, Performance, Physiological structure, |
|
Fine Arts, Year : 2013, Volume : 8, Issue : 1, Published Date : 1.01.2013 |
|
|
1844-1845 TARİHLİ_ TEMETTÜAT DEFTERİNE GÖRE ANKARA EYALETİ KONUR KAZASI (NEFS-İ KONUR) KÖYÜNÜN SOSYAL VE EKONOMİK YAPISI
ANKARA PROVINCE KONUR COUNTYâ€â„¢S SOCIAL AND ECONOMICAL STRUCTURE ACCORDING TO 1844-1845 TEMETTÜAT NOTEBOOK |
| Ankara Eyaleti, Konur Kazası, Temettüat Defteri, Mesleki Yapılanma, Gelir, |
| Ankara Province, Konur County, Temettuat Notebook, Professional Structure, Revenue, |
|
Humanities Sciences, Year : 2013, Volume : 8, Issue : 1, Published Date : 1.01.2013 |
|
|
OSMANLI DÖNEMİNDE KULLANILAN YAKLAŞIK MALİYET TAHMİN YÖNTEMLERİ
COST ESTIMATION TECHNIQUES USED IN THE OTTOMAN ERA |
| Yapı, İnşaat, Renovasyon, Maliyet Tahmini, Osmanlı Dönemi, |
| Structure, Construction, Renovation, Cost Estimation, Ottoman Era, |
|
Engineering Sciences, Year : 2012, Volume : 7, Issue : 1, Published Date : 1.01.2012 |
|
|
BİLGİ VERİCİ METİN YAPILARI ÖĞRETİMİNİN OKUDUĞUNU ANLAMAYA ETKİSİ
THE EFFECT OF EXPOSITORY TEXT STRUCTURE ON READING COMPREHENSION |
| Bilgi Verici Metinler , Metinler, Metin Yapıları, Okuduğunu Anlama, , Statik-Grup Karşılaştırma Deseni, |
| Expository Texts , Texts, Text Structures, Reading Comprehension, Static-Group Comparison Design, |
|
Education Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
STRATONIKEIA (ESKİHİSAR KÖYÜ) YERLEŞİMİNDE TARİHSEL GELİŞİM VE SOSYAL DEĞİŞİMİN KENTSEL DOKUYA ETKİLERİNİN İRDELENMESİ
EXAMINING THE EFFECTS OF HISTORICAL AND SOCIAL CHANGE IN URBAN TISSUE OF STRATONIKEIA (ESKYHYSAR VILLAGE) |
| Stratonikeia, Eskihisar, Sosyal Yapı, Kentsel Doku, Restorasyon, |
| Stratonikeia, Eskihisar, Social Structure, Urban Tissue, Restoration, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
KARBON ELYAF ÇUBUKLARLA GÜÇLENDİRİLMİŞ AHŞAP BOY BİRLEŞİMLERİNİN EĞİLME DAVRANIŞLARININ İNCELENMESİ
INVESTIGATION OF BENDING BEHAVIOUR OF TIMBER CONNECTION STRENGTHEN WITH CARBON FIBER BAR |
| Ahşap Yapy, Eğilme Mukavemeti, Kertmeli Boy Birleştirme, Karbon Elyaf Takviyeli Plastik (KTP), Güçlendirme, |
| Timber Structures, Bending Strength, Longitudinal Notched Lap Joint, Carbon Fiber Reinforced Plastic (CFRP), Reinforcement, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
YÜKSEK BİNALARDA GÜNCEL YAKLAŞIMLAR: DÖNER FORMLAR
A RECENT TREND IN TALL BUILDING DESIGN: TWISTED FORMS |
| YÜKSEK BYNALAR, DÖNER FORMLAR, TA?IYICI SYSTEM, CEPHE TASARIMI, DYYAGRYD STRÜKTÜRLER, |
| TALL BUILDINGS, TWISTED FORMS, STRUCTURAL SYSTEM, FACADE DESIGN, DIAGRID STRUCTURES, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
ÇOK KATLI YAPILARIN STATİK İTME EĞRİSİNİN ELDE EDİLMESİ İÇİN PRATİK BİR YÖNTEM
A PRACTICAL METHOD FOR DETERMINATION OF THE PUSHOVER CURVES OF MULTISTOREY STRUCTURES |
| Statik itme eğrisi, Yapı, Deprem, Pratik yöntem, Doğrusal olmayan statik analiz, |
| Pushover curves, Structure, Earthquake, Practical method, Nonlinear static analysis, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
AHŞAP İSKELET SİSTEMDE ISI VE BUHAR GEÇİŞİNİN TS 825 ISI YALITIM STANDARDINA GÖRE DEĞERLENDİRİLMESİ
VAPOR AND HEAT TRANSFER IN THE TIMBER FRAME OF EVALUATION ACCORDING TO THE TS 825 HEAT INSULATION PROGRAM |
| Ahşap iskelet sistem, TS 825, Isı yalıtımı, Isı kaybı, Buhar geçişi, |
| Wood Frame Structure, TS 825, Heat insulation, Heat Dissipation, Transfer of Vapor, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 4, Published Date : 1.10.2011 |
|
|
ORTAÖĞRETİM 10. SINIF KİMYA DERSİ ÖĞRETİM PROGRAMINDA YER ALAN “ATOMUN YAPISI” ÜNİTESİ İLE İLGİLİ ÖĞRETMEN GÖRÜŞLERİ
TEACHERS’ OPINIONS ABOUT “THE STRUCTURE OF ATOM” WHICH IS INCLUDED IN THE SECONDARY EDUCATION CURRICULUM OF 10TH GRADE CHEMISTRY CLASS |
| Kimya, Kimya Öğretim Programı, Ortaöğretim, Öğretmen Görüşleri, Atomun Yapısı, |
| Chemistry, Chemistry Curriculum, Secondary Education, Opinions of Teachers, The Structure of Atom, |
|
Education Sciences, Year : 2011, Volume : 6, Issue : 3, Published Date : 1.07.2011 |
|
|
3B GRAVİTE HESAPLARIYLA DOĞU PONDİTLERDE KABUK ÇALIŞMASI
CRUST STUDYING IN THE EASTERN PONTIDES BY 3D GRAVITY ALGORIHM |
| Gravite, 3-B Modelleme, Derinlik, Kabuk Yapısı, Moho , |
| Gravity, 3-D Modeling, Depth, Crustal Structure, Moho, |
|
Nature Sciences, Year : 2011, Volume : 6, Issue : 3, Published Date : 1.07.2011 |
|
|
BARTIN İLİ İŞGÜCÜ PİYASASININ İNCELENMESİ
INVESTIGATION OF THE LABOUR MARKET OF BARTIN CITY |
| İşgücü , İşsizlik, Bartın İşgücü Piyasası , Bartın İli İstihdam Yapısı, Sosyo-Ekonomik Sorunlar, |
| Labour , Unemployment, Bartın Labour Market , Bartın City Employment Structure, Social-Economics Problems, |
|
Social Sciences, Year : 2011, Volume : 6, Issue : 2, Published Date : 1.04.2011 |
|
|
ZAYIF EKSENDE EĞİLEN U KESİTLİ KİRİŞLERİN SONLU ELEMAN MODELLEMESİNDE ÇÖZÜM AĞI SIKLIĞI ETKİSİNİN İNCELENMESİ
INVESTIGATION OF MESH SIZE EFFECT IN FINITE ELEMENT ANALYSIS OF MINOR AXIS BENDING U SECTION BEAMS |
| Sonlu elemanlarla modelleme, U kesitli kirişler, Çözüm ağı yoğunluğu, Çelik Yapı Elemanları, ABAQUS, |
| Finite element modeling, U section beams, Mesh density, Steel Structure Elements, ABAQUS, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
GA İLE OPTİMAL DEĞİŞKEN YAPILI GÜÇ SİSTEM KARARLAYICISI TASARIMI
VVARIABLE STRUCTURE POWER SYSTEM STABILIZER OPTIMIZED BY GENETIC ALGORITHM |
| Güç Sistem Kararlayıcı, Uyarma Kontrol, Değişken Yapılı Kontrol, Genetik Algoritmalar, Optimizasyon, |
| Power Systems Stabilizer, Excitation Control, Variable Structure Control, Genetic Algorithms, Optimization, |
|
Engineering Sciences, Year : 2011, Volume : 6, Issue : 1, Published Date : 1.01.2011 |
|
|
YENiÇAĞA GÖLÜ’NDE (BOLU) BALIKÇILIK, BALIK POPULASYONLARI ve SÜRDÜRÜLEBİLİR BALIKÇILIK YÖNETİMİ
FISHING, FISH POPULATION AND SUSTAINABLE FISHING MANAGEMENT IN THE LAKE YENIÇAĞA (BOLU) |
| Yeniçağa Gölü, Balıkçılık, Populasyon Yapısı, Sürdürülebilir Balıkçılık Yönetimi, Bolu, |
| Yenicaga Lake, Fishing, Population Structure, Sustainable Fishing Management, Bolu, |
|
Ecological Life Sciences, Year : 2010, Volume : 5, Issue : 4, Published Date : 1.10.2010 |
|
|
PREFABRİK BETONARME PLAKLAR İLE ÇOK AMAÇLI KENTİÇİ YOL YAPIMI
MULTI-PURPOSE URBAN ROAD CONSTRUCTION WITH PREFABRICATED CONCRTE PLATE |
| Prefabrik Eleman , Öngerilemeli Eleman, Betonarme, Altyapı, SAP2000, |
| Prefabricated Member, Prestressed Member, Reinforced Concrete, Infrastructure, SAP2000, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 4, Published Date : 1.10.2010 |
|
|
FARKLI ANLAMSAL YAPILARDAKİ PROBLEMLERİN ÇÖZÜMÜNDE KULLANILAN İŞLEM TEKNİKLERİNİN DEĞERLENDİRLMESİ
EVALUATION OF OPERATION TECHNIQUES USED FOR THE SOLUTION OF PROBLEMS WITH DIFFERENT SEMANTIC STRUCTURE |
| Sözel Problemler , Problem Çözme , İşlemler, Problemlerin Anlamsal Yapıları , Matematik Eğitimi, |
| Word Problems , Problem Solving, Operations, Semantic Structures of the Problems, Mathematics Education, |
|
Education Sciences, Year : 2010, Volume : 5, Issue : 3, Published Date : 1.07.2010 |
|
|
İLKÖĞRETİM 5. SINIF YOĞUNLUK KONUSUNDA BİLİMSEL SORGULAMAYA DAYALI LABORATUVAR ETKİNLİK ÖRNEĞİ
LABARATORY ACTIVITY SAMPLE BASED ON INQUIRY ON THE SUBJECT OF ELEMENTARY EDUCATION FIFTH GRADE DENSITY |
| Bilimsel sorgulama, 5E , Yoğunluk, Laboratuvar Etkinlikleri, Yapılandırılmış Sorgulama, |
| Inquiry, 5E , Density, Labaratory Activities, Structured inquiry, |
|
Education Sciences, Year : 2010, Volume : 5, Issue : 3, Published Date : 1.07.2010 |
|
|
TÜRKİYE’DE GELENEKSEL KIR KONUT YAPISININ 20. YÜZYILDAKİ DEĞİŞİMİNE YEŞİLOVA (BURDUR) ÖRNEĞİ
YEŞILOVA (BURDUR) - AN EXAMPLE OF CHANGE IN THE TRADITIONAL RURAL HOUSE STRUCTURE IN TURKEY DURING THE 20TH CENTURY |
| Geleneksel Kır Konutları , Kır Yerleşmeleri, Konut Yapı Değişimi, Kültür, Yeşilova (Burdur), |
| Traditional rural house, Rural settlements, Change in house structure, Culture, Yeşilova (Burdur), |
|
Nature Sciences, Year : 2010, Volume : 5, Issue : 3, Published Date : 1.07.2010 |
|
|
AVUSTRALYA SPOR YÖNETİM SİSTEMİ
AUSTRALIA SPORT MANAGEMENT SYSTEM |
| Spor Yönetimi, Yönetim, Spor Komisyonu, Yönetim Yapısı, Yönetim Sistemi, |
| Sport Management, Management, Sport Commission, Management Structure, Management System, |
|
Sport Sciences, Year : 2010, Volume : 5, Issue : 3, Published Date : 1.07.2010 |
|
|
TOZALTI ARK KAYNAĞI İLE BİRLEŞTİRİLEN FARKLI KALINLIKTAKİ GRADE A GEMİ SACLARININ MEKANİK ÖZELLİKLERİNİN ARAŞTIRILMASI
INVESTIGATION OF THE MECHANICAL PROPERTIES OF DIFFERENT THICKNESS OF THE GRADE A SHIP PLATES JOINED BY SUBMERGED ARC WELDING |
|
Yakup KAYA, Behçet GULENC , Nizamettin KAHRAMAN , Ahmet DURGUTLU |
| Gemi sacı, Tozaltı ark kaynağı, Mekanik özellikler, Mikroyapı, Sertlik, |
| Ship plate, submerged arc welding, mechanical properties, microstructure, hardness, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
OPTİMUM MALİYETLİ BİNA EBATLARININ YAPAY SİNİR AĞLARI (YSA) YARDIMIYLA BELİRLENMESİ
DETERMINING OPTIMUM COST BUILDING CHARACTERISTICS WITH ARTIFICIAL NEURAL NETWORKS (ANN) |
| Yapy Maliyeti, Toplu Konutlar, Yapay Sinir Ağları (YSA), Yapı Ön Tasarımı, Yapy Karakteristik Özellikleri, |
| Structure Cost, Collective Residential Buildings, Artificial Neural Networks (ANN), Structure Preplanning, Structural Characteristics, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
CO2 LAZER IŞIN KAYNAĞI İLE BİRLEŞTİRİLEN FARKLI MALZEMELERİN (AISI 430-AISI 304) MİKROYAPI VE MEKANİK ÖZELLİKLERİNE YÜKSEK İLERLEME HIZININ ETKİSİ
THE EFFECTS OF HIGH WELDING SPEED ON MICROSTRUCTURE AND MECHANICAL PROPERTY OF DISSIMILAR WELDED COMPONENTS (AISI 430–AISI 304) BY CO2 LBW METHOD |
| Farklı Malzemeler (AISI 430–304), CO2 LBW, Kaynak Hızı, Mikroyapı, Mekanik Özellikler, |
| Dissimilar Components (AISI 430-304), CO2 LBW, Welding Speed, Microstructure, Mechanical Property, |
|
Technological Applied Sciences, Year : 2010, Volume : 5, Issue : 2, Published Date : 1.04.2010 |
|
|
PETEK YAPILI SANDVİÇ YAPILARDA KÖPÜK DOLGUSUNUN KRİTİK BURKULMA YÜKÜNE ETKİSİ
EFFECT OF FOAM FILLING ON THE CRITIC BUCKLING LOAD OF THE HONEYCOMB SANDWICH STRUCTURES |
| Bal peteği sandviç yapılar, Köpük ilavesi, Kritik burkulma yükü, Basma testi, Kompozit malzeme, |
| Honeycomb sandwich structures, Foam addition, Critic buckling load, Compressive test, Composite material, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 1, Published Date : 1.01.2010 |
|
|
PLAZMA TRANSFERLİ ARK KAYNAK YÜZEY İŞLEMİYLE AISI 304 PASLANMAZ ÇELİK YÜZEYİNE WC-Ni-B4C KOMPOZİT KAPLAMASININ MİKROYAPISAL KARAKTERİSTİĞİ
MICROSTRUCTURAL CHARACTERISTIC OF WC-Ni-B4C REINFORCED COMPOSITE COATINGS ON AISI 304 STAINLESS STEEL BY PLASMA TRANSFERRED ARC WELD SURFACING |
| PLAZMA TRANSFERLİ ARK KAPLAMA, MİKROYAPI, KARBÜRLER, ABRAZİF AŞINMA, BOR KARBÜR, |
| Plasma transferred arc coating, Microstructure, Carbides, Abrasive wear, Bor carbide, |
|
Engineering Sciences, Year : 2010, Volume : 5, Issue : 1, Published Date : 1.01.2010 |
|
|
ELAZIĞ YÖRESİNDEKİ ARICILIK İŞLETMELERİNİN SOSYO-EKONOMİK YAPISININ BELİRLENMESİ
DETERMINATION OF SOCIO-ECONOMIC STRUCTURE OF BEEKEEPING ENTERPRISES IN ELAZIG REGION |
| Elazığ, Arıcılık, Arıcılık İşletmeleri, Sosyo-Ekonomik Yapı, Anket, |
| Elazig, Beekeping, Beekeping enterprises, Socio-economic structure, Questionnaire, |
|
Veterinary Sciences, Year : 2010, Volume : 5, Issue : 1, Published Date : 1.01.2010 |
|
|
GELİŞTİRİLEN BİR YAPISAL ANALİZ PROGRAMIYLA YIĞMA YAPILARIN ANALİZİ
ANALYSES OF MASONRY STRUCTURES WITH A DEVELOPING STRUCTURAL ANALYSIS SOFTWARE |
| FEMMAS, Yığma Yapılar, Sonlu Elemanlar Metodu, LUSAS, Doğrusal Analiz, |
| FEMMAS, Masonry Structures, Finite Element Method, LUSAS, Linear Analysis, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 4, Published Date : 1.10.2009 |
|
|
HENDEK’TE SANAYİNİN YAPISI VE DAĞILIŞI
THE STRUCTURE AND DISTRIBUTION OF INDUSTRY IN HENDEK IN TURKEY |
| Sakarya, Hendek, Ulaşım, Sanayinin Dağılışı, Sanayinin Yapısı, |
| Sakarya, Hendek, Transportation, Distribution of industry, The Industry's Structure, |
|
Nature Sciences, Year : 2009, Volume : 4, Issue : 4, Published Date : 1.10.2009 |
|
|
DEPREM TEHDİDİ ALTINDAKİ MÜHENDİSLİK YAPILARININ HAKİM TİTREŞİM PERİYOTLARININ BELİRLENMESİNDE YENİ BİR SEÇENEK: MİKROTREMOR YÖNTEMİ VE ÖRNEK UYGULAMASI
NEW METHOD TO DETERMINATION OF FUNDAMENTAL FREQUENCY OF ENGINEERING STRUCTURES AGAINST EARTHQUAKE HAZARD: MICROTREMOR METHODS AND CASE STUDY |
| Zemin-Yapı Etkileşimi, Mikrotremor, Nakamura Tekniği, Titreşim Frekansı, İstanbul Üniversitesi, |
| Soil-Structure Interaction, Nakamura’s Technique, Frequency of Vibration, İstanbul University, Microtremor, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 3, Published Date : 1.07.2009 |
|
|
DEĞER KODLAMASI KULLANARAK UZAY KAFES SİSTEMLERİNİN GENETİK ALGORİTMA İLE MİNİMUM AĞIRLIKLI BOYUTLANDIRILMASI
LEAST WEIGHT DESIGN OF SPACE TRUSSES BY USING VALUE ENCODING IN GA WITH DISCRETE DESIGN VARIABLES |
| Genetik Algoritma, Optimizasyon, Uzay Kafes Yapılar, Ayrık Tasarım Değişkenleri, Değer Kodlaması, |
| Genetic Algorithm, Optimization, Space Truss Structure, Discrete Design Variable, Value Encoding, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 3, Published Date : 1.07.2009 |
|
|
DEPREM VERİLERİNİN YAPILARIN DİNAMİK PARAMETRELERİNİN BELİRLENMESİNDE KULLANIMI
IDENTIFICATION OF DYNAMIC PARAMETERS OF STRUCTURES USING EARTHQUAKE DATA |
| Girdi-Çıktı Sistem Tanı(m)lama Yöntemleri, Yapı Dinamiği, Yapıların Enstrümentasyonu, Çelik Yapılar, Kuvvetli Yer Hareketi, |
| Input-output System Identification Methods, Structural Dynamics, Instrumentation of Structures, Steel Moment Resisting Frames, Strong Ground Motion, |
|
Engineering Sciences, Year : 2009, Volume : 4, Issue : 3, Published Date : 1.07.2009 |
|
|
İLKÖĞRETİMDE “MADDENİN İÇYAPISINA YOLCULUK” KONUSUNUN ÖĞRETİMİNDE YAPILANDIRMACI YAKLAŞIMIN ETKİSİ
THE EFFECT OF CONSTRUCTIVIST APPROACH TO THE TEACHING OF THE UNIT “JOURNEY TO THE INNER STRUCTURE OF MATTER |
| Yapılandırıcı yaklaşım, geleneksel yaklaşım, maddenin içyapısı, ÖĞRETİM, KİMYA EĞİTİM, |
| Constructivist Teaching, Traditional Teaching, Inner Structure of Matter, CHEMISTRY EDUCATION, TEACHING, |
|
Education Sciences, Year : 2009, Volume : 4, Issue : 2, Published Date : 1.04.2009 |
|
|
KÜLTÜREL YAPI VE DİNÎ KODLARIN KİTLE İLETİŞİM ARAÇLARINDA SUNUMU
CULTURAL STRUCTURE AND RELIGIOUS CODES BEING REPRESENTED ON PUBLIC COMMUNICATION TOOLS |
| KÜLTÜREL KOLAR, MEDYA, İDEOLOJİ, TANRI-KUL İLİŞKİSİ, SOSYOKÜLTÜREL YAPI, |
| CULTURAL CODES, PRESS, IDEOLOGY, GOD-MAN RELATIONS, SOCIO-CULTURAL STRUCTURE, |
|
Humanities Sciences, Year : 2009, Volume : 4, Issue : 2, Published Date : 1.04.2009 |
|
|
Tİ51Nİ49 KOMPOZİTİNİN CU-Nİ ARA TABAKALI DİFÜZYON KAYNAĞINDA SICAKLIK VE SÜRENİN BİRLEŞMEYE ETKİSİNİN ARAŞTIRILMASI
THE INVESTIGATION OF THE EFFECT ON THE JOINING OF TEMPERATURE AND PERIOD ON THE Cu-Ni INTERLAYER DIFFUSION BONDING OF Ti51Ni49COMPOSITE |
| Ti51Ni49, Toz Metalurjisi, Cu-Ni Ara Tabaka, Ti51Ni49, Difüzyon Kaynağı, Mikroyapı, |
| Ti51Ni49, Powder Metallurgy, Cu-Ni Interlayer, Microstructure, Bonding, |
|
Technological Applied Sciences, Year : 2009, Volume : 4, Issue : 2, Published Date : 1.04.2009 |
|
|
GENLEŞTİRİLMİŞ KİL AGREGALI HAFİF BETON KULLANIMININ YAPI DAVRANIŞI VE KABA YAPI MALİYETİNE ETKİSİ
THE EFFECTS OF USE OF EXPANDED CLAY AGGREGATE CONCRETE ON STRUCTURAL BEHAVIOUR AND BASIC STRUCTURE COST |
| Genleştirilmiş kil agregalı beton, yapı davranışı, kaba yapı, maliyet, HAFİF BETON, |
| Expanded clay aggregate concrete, structural behavior, basic structure, cost, lightweight concrete, |
|
Technological Applied Sciences, Year : 2009, Volume : 4, Issue : 1, Published Date : 1.01.2009 |
|
|
A PROPOSAL TO SURVEY THE STRUCTURING PROCESS IN URBAN AREAS IN OUR COUNTRY: AIR LIDAR (LIGHT DETECTION AND RANGING)
ÜLKEMİZDE KENTSEL ALANLARDA YAPILAŞMA SÜRECİNİN İZLENİLMESİ İÇİN BİR ÖNERİ: HAVA LIDAR (LIGHT DETECTION AND RANGING) |
| Geography, LIDAR, Urban, Structure, Planning, |
| Coğrafya, LIDAR, Kent, Yapı, Planlama, |
|
Nature Sciences, Year : 2008, Volume : 3, Issue : 3, Published Date : 1.07.2008 |
|
|
Al/SiC METAL KÖPÜKLERİN ÜRETİMİ ve MİKROYAPISI
MICROSTRUCTURE AND PRODUCED OF Al/SiC METAL FOAMS |
| Al , TiH2, SiC, Metal Köpük, Mikroyapı., |
| Al, TiH2, SiC, Metal Foam, Microstructure., |
|
Technological Applied Sciences, Year : 2008, Volume : 3, Issue : 3, Published Date : 1.07.2008 |
|
|